RS232 TO RS485 CONVERTER RS232 to RS485/RS422 Converter

RS232 to RS485/RS422 Converter - Isolation

RS232 Input option: DB9.
RS485/RS422 output option: terminal.
RS232 to RS485 or RS232 to RS422 conversion.
Four full Duplex wires; two half duplex wires.
Switch setting for full duplex or half duplex operation.
Auto Baud Rate Sensing.
Supports transfer speeds of up to 115.2Kbps.
Extends up to 1200 meters (under 100Kbps).
Support up to 32 units to be set in RS-485 multi drop installations.
LEDS indications for power and signal status monitoring.
Over current protection when 2 signals are shortened together at the RS422/485 end.
Surge Protection 16KV ESD.
Built in termination resistors.
Power supply included.
Built in 3KV isolation protection.

ITEM NO.	RS002I
RS232 Input	DB9
RS485/422 Output	Terminal
Signal Output	2-wire half-duplex RS485 or 4-wire full-duplex RS485/RS422
LEDS	Power(RED), TX-485/422(GRN), RX-1422(GRN), TX-RS232(GRN), RX-RS232(RED),DTS(GRN),RTS(GRN)
Transmission Range	1200 meter (4000 ft)
Data Rate	Up to 115.2Kbps
Operating Temperature	0-65℃
Operation Mositure	10-90%
Power Consumption	300mA
Power Supply	DC5V 500mA Regulated
DIMENSIONS W x H x D mm	108x74x27