Product ID:TPP016VPD
The 16-channel TPP016VPD CCTV hub is using standard CAT5e & RJ45 structured building wiring to carry video, power and data for simplifying short range installation by centralizing power and reducing installation labor costs. The built in 10AMP AC24V power supply could support at-distance camera loads up to 500mA per channel. Each port built in switch to set the unit to power 2 pairs or 3 pairs. To use with TTP111VP3/ TTP111VPC/TTP111VPD-RJ45 at regular analog camera side or using with TTP11HDP/TTP111HDP-L/TTP111HDPD-RJ45 at HD-TVI/AHD/HDCVI camera side to send video, power or data for cable runs 300 meters (max.)
- TPP016VPD CCTV hub Integrate and send video and power, data over a single 4 pairs CAT5 cable up to 300 meters.
- Video support: Composite Video, HD-TVI, AHD, HDCVI.
- Built in switch at each port to set unit for “2 pair power + 1 pair data” mode or “3 pairs power” mode.
- Power cameras via 2 or 3 pairs UTP cable for variety distances (please refer to below power distance chart).
- Use with video& power Balun TTP111HDP/TTP111HDP-L(AC24V camera) or add model no: PC500/PC1A power converter (AC24V to DC12V regulated) at DC12V camera side, to send video and power only.
- Use with TTP111HDPD-RJ45 video, power, data combiner at the camera side, to send video, power and data.
- 10 Amp AC24V power, each port output current up to 1.1Amp for camera, max up to 10Amp.
- Built in “no fuse breaker” to avoid current overload.
- Built in PTC (positive temperature coefficient) for short protection and auto rework on each port.
- Perfect cable management solution from the camera to the wiring station, control room.
| Transmitter |
Receiver |
| TTP111HDP TTP111HDP-L TTP111HDPD-RJ45 |
TPP016VPD |
