Product ID:VW01
Wall Plate VGA CAT5 Extender
- Used in pairs via one CAT5 UTP cable to send VGA up to 135 meters.
- VGA connector to shielding RJ45 female.
- Wall plate outer dimension: 115 x 71 mm
- Passive device, no power required, not support VGA DDC protocol.
- Supports up to 1280x1024 pixels.
- Up to 135 meters via standard 4 pairs CAT5 STP or UTP cable instead of VGA cable.
- Transmitter built in virtual DDC to avoid improperly setting at resolution and frequency.
- Transmitter built in sync mode selection for signal stability.
- Receiver built in sync filter level adjustment for signal stability.
- Perfect for classrooms, lecture halls, tradeshows, video information displays…etc.
| 640x480 pixels (15MHz) |
135M |
| 800x600 pixels (30MHz) |
105M |
| 1024x768 pixels (60MHz) |
75M |
| 1280x1024 pixels (100MHz) |
60M |
